Reason Fader Level in dB 100=0dB so what is -3dB Etc? The Answer?

Been frustrated that Propellerhead Reason’s Meters and Faders do not use the standard dB measurement.  Instead the faders are just 0-127 (likely an artifact of MIDI), and the meters are just color-coded.

The following is something I found here after some digging.  It wasn’t easy to find so I’m re-posting it here.  This is plagiarism.  But I’m stealing bread to feed you hungry fellow frustrated and confused music producers out there.

I haven’t completely fact-checked this.  I’ll update in the next  few weeks if I find this info to be inaccurate.

[begin plagiarism]

WARNING: too much information mode = ON
(do I have a lot of time on my hands or what?!?)

Mixer Faders (and Master Fader) are Unity at 100 (or -7dB from clipping)

Mixer Fader (1-127) levels to dB:
127 = 0dB
123 = -1dB
119 = -2dB
115 = -3dB
111 = -4dB
106 = -5dB
104 = -6dB
100 = -7dB
97 = -8dB
93 = -9dB
83 = -12dB
72 = -15dB
64 = -18dB

What’s weird is that the NN-19 sampler levels don’t match these. They are:
127 = 0dB
123 = -3dB
112 = -6dB
100 = -9dB

Mixer Sends are Unity at:
Mono send = 79
Stereo send = 100
(since sereo aux sends follow channel panning, when panned hard left or right unity is at a send level of 79)

Mixer Meters: (from top to bottom)
(all levels rounded to nearest 0.5dB)
Top ‘LED’ (orange) = -1dB
2nd (orange) = -3.5dB
3rd (orange) = -6.0dB
4th (orange) = -8.5dB
5th (yellow) = -10.5dB
6th (yellow) = -13.0dB
7th (yellow) = -15.5dB
8th (yellow) = -17.5dB
9th (green) = -20.0dB
10th (green) = -22.5dB
11th (green) = -25.0dB
12th (green) = -27.3dB
13th (green) = -29.5dB
14th (green) = -32.0dB
15th (green) = -34.5dB
16th (green) = -36.5dB
17th (green) = -38.5dB
18th (green) = -41.5dB
19th (green) = -44.0dB
20th (green) = -45.5dB


If you found this information helpful, please consider making a donation. No amount is too small.

Bitcoin Donation Address: